Vintage Dirt Bike Q & A
http://vintagedirtbikeforums.alp-sys.com/

1976 CR250M rear shock rebuild kit or parts
http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4057
Page 1 of 1

Author:  thedog [ Fri May 10, 2013 3:36 pm ]
Post subject:  1976 CR250M rear shock rebuild kit or parts

Hello once again Elsie Brothers,
I'm getting close to finish of my 76 CR250M and having problems getting period rear shocks first had a nice set of molholland's but couldn't get parts for them was needing the top stem guide which broken in disassembley I will post pictures of them, next I order a set off Ebay and one had a bent stem causing the top guide to wear oblong and the bottom stem seal housing to wear down on one side due to bent stem. I need top stem guide and bottom stem seal housing for this set. I will post picture of them as well. if anyone can help me out it that would be great. thanks in advance for any help.

Attachments:
File comment: Here is diagram of shock needing #7 , #16 , bottom part of #13 or #9
Honda CR250M rear Shock.gif
Honda CR250M rear Shock.gif [ 169.05 KiB | Viewed 2548 times ]
File comment: here is the shock I need the top stem guide and lower stem seal housing
elsinore shock.jpg
elsinore shock.jpg [ 7.3 KiB | Viewed 2548 times ]
File comment: here are the Molholland shock id I need parts for
Molholland Shock ID.JPG
Molholland Shock ID.JPG [ 390.98 KiB | Viewed 2548 times ]
File comment: needing top stem guide for this molholland and top seal
Molholland Shock 1.JPG
Molholland Shock 1.JPG [ 425.13 KiB | Viewed 2548 times ]

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/