Vintage Dirt Bike Q & A http://vintagedirtbikeforums.alp-sys.com/ |
|
75 MT250 oil pump http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4785 |
Page 1 of 1 |
Author: | m@tt [ Thu Jun 08, 2017 4:13 pm ] |
Post subject: | Re: 75 MT250 oil pump |
Pretty sure the pump isn't serviceable so shouldn't be missing parts Put it back in by aligning the keyway - once on you must bleed the pump once hose connected back to the tank and put some oil in the bleed screw is top left hand side of the oil pump housing - needs to be undone until oil pours freely The tighten You then need to align the marks on the pulley to the one on the bottom of the pump housing when the throttle is fully closed Then run at low throttle until oil fills the transparent tube to the intake manifold - |
Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |