Vintage Dirt Bike Q & A http://vintagedirtbikeforums.alp-sys.com/ |
|
MT250 carb removal http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=6137 |
Page 1 of 1 |
Author: | starrblade [ Wed Jun 27, 2018 8:56 pm ] |
Post subject: | MT250 carb removal |
What is the easiest way to remove the carb from a MT250? Silly question I know, but there's got to be a way that's better than yanking it out forcibly. Thanks |
Author: | rayivers [ Thu Jun 28, 2018 7:32 am ] |
Post subject: | Re: MT250 carb removal |
You can try heating the manifold and air boot with a heat gun on low, then pushing the carb back against the boot while rotating it out of the manifold, I usually just unbolt the manifold on my MR, but that's kind of a pain with the MT oil injection. |
Author: | mafd2 [ Wed Aug 19, 2020 6:21 pm ] |
Post subject: | Re: MT250 carb removal |
starrblade wrote: What is the easiest way to remove the carb from a MT250? Silly question I know, but there's got to be a way that's better than yanking it out forcibly. Thanks Remove the carb with the intake boot then carb from boot. |
Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |