Vintage Dirt Bike Q & A
http://vintagedirtbikeforums.alp-sys.com/

YZ400F 1979 Crancase gasket
http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=28&t=1542		 Page 1 of 1
Author:  Ruairi [ Mon Aug 20, 2007 2:08 pm ]
Post subject:  YZ400F 1979 Crancase gasket
I am looking on http://www.cmsnl.com for gaskets for my YZ400 as above and....blow me...it would appear there is no gasket between the crank cases???

Surely this cannot be right??

I have a parts CD foir this particular bike on the way to me but if in the meantime anyone can answer the above with a gasket part no I would be most appreciative.
Author:  ricortes [ Tue Aug 21, 2007 8:29 am ]
Post subject:  Re: YZ400F 1979 Crancase gasket
I can't speak for your YZ400 but I believe Yamaha makes a special filler for joining case halves. It should be available from a dealer.

Rick
Author:  jimg1au [ Sun Sep 02, 2007 8:49 pm ]
Post subject:  Re: YZ400F 1979 Crancase gasket
hi
i was looking in my manuals and ther is no gasket for the engine cases it says to use yamaha bond.as it seals but dosent set hard.
cheers
jimg
sydney
australia
Author:  rossvickicampbell [ Thu Sep 20, 2007 5:23 pm ]
Post subject:  Re: YZ400F 1979 Crancase gasket
looks like the YZ 360B is the same - no listed part!

cheers

Rossco
Author:  Ruairi [ Fri Sep 21, 2007 12:01 pm ]
Post subject:  Re: YZ400F 1979 Crancase gasket
I bought some YAMAHABOND the other day and this is the right stuff apparently
Author:  Barkbuster [ Fri Jun 12, 2009 1:28 am ]
Post subject:  Re: YZ400F 1979 Crancase gasket
This was brought up in an other forum that Yamaha has changed the formula on the Yamabond 5. The new stuff is a bit runnier than the old stuff was. It works just as good as the old stuff thoug. I know honda makes a case sealing compound as well that many people use. Image
Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/