Vintage Dirt Bike Q & A

Anything and everything about Vintage Dirt Bikes! After you Register, email nathan@alp-sys.com and let me know so I can activate you.
It is currently Thu Mar 28, 2024 6:45 am

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Wed Apr 24, 2013 7:32 am 
Offline

Joined: Tue Apr 23, 2013 7:47 am
Posts: 16
I picked up a it175 and it needs tires, an intake boot and exhaust.

I saw some boots on eBay but they are $100 can somebody post a link to a suitable replacement?

I have my bike street licensed so I'd like some input on enduro tires.

This winter I'm going to freshen the engine up and I'd like to add a chambered exhaust. Does anybody know of a place that makes a pipe that will work with this bike?
Image


Top
 Profile  
 
PostPosted: Sun Apr 28, 2013 11:15 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
a Dunlop D606 is a Dot approved tire but not cheap.
this link is for the rear.
http://www.motorcycle-superstore.com/2/ ... toComplete

front tire.
http://www.motorcycle-superstore.com/2/ ... toComplete

i know of no other air cleaner boots so to keep it alive those ones are no other and if it were mine i would pay for the boots you have found.

restoring and riding vintage bikes is not at all cheap.
sorry to be the bearer of bad news. :oops:

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Sun Apr 28, 2013 11:17 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
nice machine BTW! :D

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Mon Apr 29, 2013 7:17 am 
Offline

Joined: Tue Apr 23, 2013 7:47 am
Posts: 16
Thanks for the info. I'm sorry if I used the wrong word to describe what I need. The boot I need is the one in between the carb and the engine. The existing one is full of cracks. I don't know of a way to keep it "alive".


Top
 Profile  
 
PostPosted: Mon Apr 29, 2013 7:26 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
i looked it up in parts.
this link describes all the bikes this boot was used.
http://www.partzilla.com/parts/detail/y ... 00-00.html

the part number is 1W1-13565-00-00 for the 1978 IT175.

here is a link to a boot on ebay.
http://www.ebay.com/itm/1980-Yamaha-YZ1 ... 68&vxp=mtr

does this look like the one for your bike?

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Mon Apr 29, 2013 7:36 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
all in all the price are not too bad.i dropped a lot more than 300 or so dollars bringing a bike back.i do the work myself and the figure is only for parts.

i can post pics of some of the bikes i am talking about.none of them are beauty queens though but they are mechanically sound and a blast to ride.

the bike you have is a great one and there is not too many IT175s around these days.

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Tue Apr 30, 2013 7:13 am 
Offline

Joined: Tue Apr 23, 2013 7:47 am
Posts: 16
Yes that looks like the one. Do you know if the reproduction one on eBay is a good one. I see the seller has good feedback so I guess I can assume they are, I just don't know anybody that has used one.


Top
 Profile  
 
PostPosted: Tue Apr 30, 2013 2:06 pm 
Offline

Joined: Mon Dec 10, 2012 7:27 pm
Posts: 30
Cool little IT. Depending on how bad the cracks are on your current manifold, I have used spray on Plasti Dip as a surface sealer on a couple if the cracks aren't all the way through. 3 or 4 coats and it is usually good to go. Listen to Dave, he knows his stuff.


Top
 Profile  
 
PostPosted: Thu May 02, 2013 12:44 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
Seattle,i am not sure as i have yet to try it but it is a better option than taking a chance with the existing one you have or a used one.

you can try what Scooter has said as it sure sounds like a viable option.

Scooter,is gas resistant? i may have to try this myself.do you have a link to the product you mentioned so we can check it out?

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Thu May 02, 2013 12:50 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
found the product page.
http://www.plastidip.com/diy.php

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Fri May 03, 2013 7:00 am 
Offline

Joined: Tue Apr 23, 2013 7:47 am
Posts: 16
I sprayed some plastic dip on it last night because there is a ride on Sunday I want to do. It coated very well, you can't see the cracks at all. The ride on Sunday is 60 miles so, I'll post back with the results of if it makes the whole 60 or not. :)


Top
 Profile  
 
PostPosted: Sat May 04, 2013 9:16 am 
Offline

Joined: Mon Dec 10, 2012 7:27 pm
Posts: 30
To answer your question Dave, it is gas resistant, at least from my experience. Seattledirt, you may have to do it every once in awhile till you can get a new manifold.

BTW Dave, I am Chayzed Pilot from YE.com.

Scott


Top
 Profile  
 
PostPosted: Sat May 04, 2013 2:09 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
thanks Scootern29! i had no idea on who you were.i am glad you are here!

just between us there is 1 moderator and he is the sole reason i left.

i got tired of dealing with him.

i miss everyone else though!

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
PostPosted: Sat May 04, 2013 5:05 pm 
Offline

Joined: Mon Dec 10, 2012 7:27 pm
Posts: 30
I know how you feel Dave. It's a wonder I haven't been banned. Everyone else is doing fine btw.

Scott


Top
 Profile  
 
PostPosted: Sun May 05, 2013 5:12 pm 
Offline

Joined: Tue Aug 31, 2004 1:44 am
Posts: 283
Location: Maysville, AR
Scootern29 wrote:
I know how you feel Dave. It's a wonder I haven't been banned. Everyone else is doing fine btw.

Scott

that is great to know. :D

i always had trouble with Deet.ever since he became a mod i knew he was going to be bad news and indeed it is!

before he became a mod he always busted my chops over something like the camera i used or something else.i use what i can afford at the time and that is the bottom line.

i just got sick of him and worse........Boaktiger listens to him for advice.

i would seek Enduronut or Enduroboss on moderating myself.

i still like those two very highly.

sorry to air dirty laundry here but i do speak my mind on things..... :(

i like this board here because it is so laid back.even though i could post almost anything there including computer stuff or street bike stuff but i cannot do that here.it is ok and all however.

here it is all good.i just wish some more friends from Y.E can come here and post.this board reminds me of Y.E circa 2006 and it is a great board itself.i plan to at least revive the Yamaha end here if possible. :D plus i can post about my Elsinores here which happens to be a favorite of mine as well. :D

_________________
(2) 1968 DT1 1970 RT1M,1970 DT1C 1971 RT1B Enduro 1974 MT250 1974 DT250A (2) 1975 DT400B 1974 DT100,1978 DT175
1975 CR250M1 1979 CR250R 1979 Kawasaki KZ400H1 Jesus is Lord!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group