Vintage Dirt Bike Q & A

Anything and everything about Vintage Dirt Bikes! After you Register, email nathan@alp-sys.com and let me know so I can activate you.
It is currently Thu Mar 28, 2024 7:08 am

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: 83 250YZ tranny bearings
PostPosted: Tue Jun 06, 2017 8:07 pm 
Offline

Joined: Tue Jun 06, 2017 6:59 pm
Posts: 1
Hello All

I have a question about tranny bearings on an 83 YZ250K. The existing bearings on the clutch-side of the main shaft, and on the left side of the other shaft (near the sprocket) are both sealed bearings. Is this stock or from a previous rebuild? The bearings seem solid, but the rubber/plastic on the sealing rings has bubbled and hardened, and is basically flaking off into the tranny.

Should these be sealed bearings (seems odd)? If so, then they need to be replaced with new sealed bearings. If not then I could just pop off the sealing rings since the bearings seem fine, or replace the bearings with non-sealed ones.

Thanks

John


Top
 Profile  
 
PostPosted: Thu Jul 27, 2017 1:38 pm 
Offline

Joined: Thu Apr 03, 2014 11:15 am
Posts: 2
Not sure, but seems odd they'd be sealed....like you said.

_________________
2013 KTM 450SX
1975 Honda MT 250


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group