Vintage Dirt Bike Q & A http://vintagedirtbikeforums.alp-sys.com/ |
|
76 RM250 Foot Pegs/Fork Guards http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=29&t=4189 |
Page 1 of 1 |
Author: | robthesnail [ Sun Dec 01, 2013 9:06 pm ] |
Post subject: | Re: 76 RM250 Foot Pegs/Fork Guards |
yeah i have been looking for a while now, seems like there are pegs to fit 75tm250s but not rms till about 77/78 i am rebuilding a 76 as well |
Author: | Spooch22 [ Tue Dec 24, 2013 8:22 pm ] |
Post subject: | Re: 76 RM250 Foot Pegs/Fork Guards |
Very hard to find both. The fork protectors might be impossible |
Author: | robthesnail [ Mon Apr 21, 2014 3:15 am ] |
Post subject: | Re: 76 RM250 Foot Pegs/Fork Guards |
i just made some inserts to go aroumd the originals...bit of steel about 12 mm wide by about 3 mm thick...bent around a bit of pipe and welded on,,,,there the same as aftermarket ones for my rmz450 |
Author: | robthesnail [ Mon Apr 21, 2014 3:17 am ] |
Post subject: | Re: 76 RM250 Foot Pegs/Fork Guards |
front fork protectors mmmmmm i have one but have given up on finding another so am using some electrical cable ducting lid or a piece of hot wheels track...the old matchbox toy |
Author: | superrat [ Thu Oct 12, 2017 1:49 pm ] |
Post subject: | Re: 76 RM250 Foot Pegs/Fork Guards |
Try DC Plastics they list 2 colors for a 76 RM250/370. I think the forks assemblies are different but the lower legs (what the protectors protect) has the same part number on Partsfish. Here is a link to DC Plastics https://www.dcvmx.com/xcart/product.php ... 291&page=1 |
Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |