Vintage Dirt Bike Q & A
http://vintagedirtbikeforums.alp-sys.com/

76 RM250 Foot Pegs/Fork Guards
http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=29&t=4189
Page 1 of 1

Author:  Spooch22 [ Sun Nov 03, 2013 6:39 pm ]
Post subject:  76 RM250 Foot Pegs/Fork Guards

Can anyone tell me where I can buy wide aftermarket foot pegs and stock plastic fork guards for my rm?

Attachments:
image.jpg
image.jpg [ 292.15 KiB | Viewed 7783 times ]

Author:  robthesnail [ Sun Dec 01, 2013 9:06 pm ]
Post subject:  Re: 76 RM250 Foot Pegs/Fork Guards

yeah i have been looking for a while now, seems like there are pegs to fit 75tm250s but not rms till about 77/78 :(
i am rebuilding a 76 as well

Author:  Spooch22 [ Tue Dec 24, 2013 8:22 pm ]
Post subject:  Re: 76 RM250 Foot Pegs/Fork Guards

Very hard to find both. The fork protectors might be impossible

Author:  robthesnail [ Mon Apr 21, 2014 3:15 am ]
Post subject:  Re: 76 RM250 Foot Pegs/Fork Guards

i just made some inserts to go aroumd the originals...bit of steel about 12 mm wide by about 3 mm thick...bent around a bit of pipe and welded on,,,,there the same as aftermarket ones for my rmz450

Author:  robthesnail [ Mon Apr 21, 2014 3:17 am ]
Post subject:  Re: 76 RM250 Foot Pegs/Fork Guards

front fork protectors mmmmmm i have one but have given up on finding another so am using some electrical cable ducting lid or a piece of hot wheels track...the old matchbox toy

Author:  superrat [ Thu Oct 12, 2017 1:49 pm ]
Post subject:  Re: 76 RM250 Foot Pegs/Fork Guards

Try DC Plastics they list 2 colors for a 76 RM250/370. I think the forks assemblies are different but the lower legs (what the protectors protect) has the same part number on Partsfish. Here is a link to DC Plastics https://www.dcvmx.com/xcart/product.php ... 291&page=1

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/