|Vintage Dirt Bike Q & A
|1987 250 WR clutch problem
|Page 1 of 1|
|Author:||flynguy [ Thu Sep 01, 2016 6:19 pm ]|
|Post subject:||1987 250 WR clutch problem|
Recently finished a rebuild of an '87 250 WR. Bike started right up but within a minute the clutch went "dead". That is the lever lost all pull and went straight to the handlebar. I suspected the set screw on the side of the clutch and sure enough it had backed out, even with the lock nut set. I reset it and used locktite. Same result. This fix requires removing the clutch cover so I only want to do it one more time. Any suggestions would be appreciated. Thanks.
|Page 1 of 1||All times are UTC - 7 hours [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group