Vintage Dirt Bike Q & A http://vintagedirtbikeforums.alp-sys.com/ |
|
Bultaco 250 crankshaft, clutch interchangeability? http://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=35&t=2702 |
Page 1 of 1 |
Author: | claytonia [ Wed Jun 02, 2010 2:14 pm ] |
Post subject: | Bultaco 250 crankshaft, clutch interchangeability? |
I have a 250 Pursang Mk.4 (mod. 68) that I am hoping to restore. The block is still together, but I'm planning on doing a rebuild on it (bearings, seals, gaskets, etc.). The rod big end bearing is definitely shot, but I'm not sure how feasible/expensive it is to replace it - do I take it to a machine shop or bike shop to have it separated and pressed back together, then aligned? There are several cranks w/rods in decent shape on eBay, but I am not sure which various years/models are interchangeable. The same for the clutch, as the sprocket teeth are shot and i need to replace it. Thanks for any help or advice! |
Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |