Vintage Dirt Bike Q & A

Anything and everything about Vintage Dirt Bikes! After you Register, email nathan@alp-sys.com and let me know so I can activate you.
It is currently Wed Jun 18, 2025 7:32 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: MR250 wheels
PostPosted: Thu Aug 22, 2013 6:17 pm 
Offline

Joined: Thu Aug 22, 2013 6:11 pm
Posts: 4
Looking for help on both rear wheel and front wheel, MR250.
In the rear,,, is there some type of a cap/spacer on the left rear axle of the bike? mine does not look complete in some way. Maybe there is a manual or picture to show me what is suppose to be there...
On the front wheel,, speedometer drive,, what the heck is in there exactly that makes the speedometer drive turn from the wheel itself? Im fairly certain my speedometer cable and adapter are fine there.... they spin by hand and all works. But on the wheel,,,,,,, uncertain.... thanks folks...


Top
 Profile  
 
 Post subject: Re: MR250 wheels
PostPosted: Thu Aug 22, 2013 9:43 pm 
Offline

Joined: Thu Mar 21, 2013 1:38 am
Posts: 55
You can go to Honda parts and look at the exploded diagram to see what all your missing.


Top
 Profile  
 
 Post subject: Re: MR250 wheels
PostPosted: Fri Aug 23, 2013 4:59 am 
Offline

Joined: Sun Nov 30, 2008 12:10 pm
Posts: 1010
Location: Connecticut, USA
It looks like the MR250 rear wheel uses the same setup as my Hondas - one LH sliding collar on the swingarm (the RH one is built into the axle end), and left / right axle spacers.

http://www.powersedge.com/pages/OemParts?aribrand=HOM#/Honda/MR250_A_(76)_MOTORCYCLE%2c_JPN%2c_VIN%23_MR250-1000001_TO_MR250-1010551/REAR_WHEEL/MR250-76-JPN-A/2Y133950F13395009A

If I recall, my MR250 front wheel had the speedo drive fitting into a recessed ring that was screwed into the spoke retainer, which then screwed to the hub. I don't see any spacers in the parts diagram. I believe the speedo drive had a retaining screw to the RH fork leg, but I didn't have the forks, only the wheel.

http://www.powersedge.com/pages/OemParts?aribrand=HOM#/Honda/MR250_A_(76)_MOTORCYCLE%2c_JPN%2c_VIN%23_MR250-1000001_TO_MR250-1010551/FRONT_WHEEL/MR250-76-JPN-A/2Y133950F13395007A

Ray

_________________
'74 CR125M (175cc), '75 MR175, '82 RM250Z, '08 YZ250F, '14 Zero FX electric, '14 Zero MX electric, '18 Alta MXR electric


Top
 Profile  
 
 Post subject: Re: MR250 wheels
PostPosted: Fri Aug 23, 2013 7:42 am 
Offline

Joined: Thu Aug 22, 2013 6:11 pm
Posts: 4
Yes for the front speedo drive all the parts are not listed on any website. The speedometer drive interfaces to the hub. between those two I am missing something. Just not sure what it is.


I will investigate further on the back . maybe i have all that is required, it just looks odd.


Top
 Profile  
 
 Post subject: Re: MR250 wheels
PostPosted: Fri Aug 23, 2013 8:22 am 
Offline

Joined: Sun Nov 30, 2008 12:10 pm
Posts: 1010
Location: Connecticut, USA
You couldn't determine what was missing from the two diagrams I linked to in my reply? Every part is there.

Ray

_________________
'74 CR125M (175cc), '75 MR175, '82 RM250Z, '08 YZ250F, '14 Zero FX electric, '14 Zero MX electric, '18 Alta MXR electric


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group