| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Little Red Wire for 74 cr 250m??? https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1061 |
Page 1 of 1 |
| Author: | el-senor [ Mon Jun 12, 2006 3:36 pm ] |
| Post subject: | Little Red Wire for 74 cr 250m??? |
Anybody know a supplier of the red cloth wiring that comes off the ignition and is routed up the frame?Also a supplier for the rubber grommet it runs thru.I have the connector,need the wire.Any ideas,mine is ratty.Thanks,eL. |
|
| Author: | frohrs [ Tue Jun 13, 2006 5:14 pm ] |
| Post subject: | Ignition wiring 74CR250 |
I had the same problem, couldn't find the red cloth material. I went with electrical tape & shrink tubing using my heat gun but it looks nice & neat. Maybe your local Honda Dealer for the rubber gromment? Looks like I'll have to do it again as I'm switching over to the PVL Ignition. |
|
| Author: | el-senor [ Tue Jun 13, 2006 8:30 pm ] |
| Post subject: | |
I found this company that supplies wiring for radio and amplifier restoration...http://www.radiodaze.com There sending me some to try out...I'll post some pics when I'm finished.It looks pretty close to the oem.Thanks for the tip.eL. |
|
| Author: | el-senor [ Fri Jun 16, 2006 8:53 pm ] |
| Post subject: | |
Got my samples...Too thick,20 gauge is the thinnest they sell,I may need 22 or 24 gauge.Any Ideas? |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|