| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Shock Seal Size - 25mm x 12.5mm x 7mm 73-76 CR250 https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=13238 |
Page 1 of 1 |
| Author: | czmadness [ Sat Nov 20, 2021 9:08 am ] |
| Post subject: | Shock Seal Size - 25mm x 12.5mm x 7mm 73-76 CR250 |
Anybody use 1" x 1/2" x 1/4" instead? Numbers are close and SAE is cheaper than metric. |
|
| Author: | m@tt [ Sun Nov 21, 2021 5:38 am ] |
| Post subject: | Re: Shock Seal Size - 25mm x 12.5mm x 7mm 73-76 CR250 |
Not personally, but others here have used the imperial seals and reported success From memory you’d be better off with a 3/8 depth rather than 1/4 as the stock seals are 9mm deep |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|