| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 1974 honda 250m elsinore sproket https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1343 |
Page 1 of 1 |
| Author: | fxracing1992 [ Fri Feb 16, 2007 2:16 pm ] |
| Post subject: | 1974 honda 250m elsinore sproket |
hey just wondering if any of you guys new how many teeth were on the sproket of 1974 honda 250m elsinore,i need one bad!! thanks |
|
| Author: | redrocket190 [ Fri Feb 16, 2007 2:25 pm ] |
| Post subject: | |
Stock is 14 front and 48 rear. You can get sprockets from 11-15 for the front and 34-74 for the rear. http://www.sprocketspecialists.com |
|
| Author: | el-senor [ Fri Feb 16, 2007 5:40 pm ] |
| Post subject: | |
According to my owners manual(Pg48) , standard sprockets for the '73-'74 CR250m are 14 front, 47 rear. Optional sprockets are 13 front and 45 or 49 rear. |
|
| Author: | redrocket190 [ Fri Feb 16, 2007 5:53 pm ] |
| Post subject: | |
Manual 1 Sprocket Specialists 0... |
|
| Author: | mx317 [ Sun Apr 19, 2009 6:15 pm ] |
| Post subject: | Re: 1974 honda 250m elsinore sproket |
akaduck wrote: JT sprockets offers sprockets that will work. The front sprocket is used on the CR250M K0, '76, and M1 as well as on the MT250 K0, K0, and '76. The rear sprocket is ONLY used on the CR250M. However, it's worth your time to measure your sprockets and take a look at JT's website to find a sprock that will work for you. Early model XL250 rear sprockets are the same as the CR250M except they are steel. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|