| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 1980 CR80 shock shaft seal needed: 10x20x5 https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1507 |
Page 1 of 1 |
| Author: | mrmikkelsen [ Wed Jul 11, 2007 4:01 pm ] |
| Post subject: | 1980 CR80 shock shaft seal needed: 10x20x5 |
Hey, these CR80 shocks are rebuildable! Now I'll be really impressed if anyone can help me find the 10x20x5 shock shaft seal I need to button them up. Thank you! Jon |
|
| Author: | GHOPPER [ Thu Jul 12, 2007 8:03 am ] |
| Post subject: | Re: 1980 CR80 shock shaft seal needed: 10x20x5 |
http://www.moto-pro.com/ProductPage.asp?strMPSID=TCRESOIL Here ya go, and here's one for alot less. http://www.planopower.com/store/honda/fg110.shtml |
|
| Author: | mrmikkelsen [ Thu Jul 12, 2007 12:15 pm ] |
| Post subject: | Re: 1980 CR80 shock shaft seal needed: 10x20x5 |
Thanks for the tips. While I am not sure how important the differences are between a shipping-seal, and a shock-shaft seal, they certainly do look different. I had the rep at our local hydraulic supply company call their manufacturer, and he scored. I have a set of actualy hydraulic shaft seals on the way. Now if anyone knows how important the seal differences are, I'd sure like to hear about it. Thanks again! Jon |
|
| Author: | mrmikkelsen [ Sat Jul 14, 2007 2:25 pm ] |
| Post subject: | Re: 1980 CR80 shock shaft seal needed: 10x20x5 |
Shipping seal? That's spinning seal - I meant a seal for a shaft that spins, like a crankshaft. This being a shock-shaft goes in and out, not round and round. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|