hi
i have read that 76 gear box fits in the 1973 cases.what other parts will interchange.will crank and ignition swap.i know the barrel is different
cheers
jimg
| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| cr250m 1973 will 1976 motor parts fit https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1529 |
Page 1 of 1 |
| Author: | jimg1au [ Mon Aug 06, 2007 8:12 am ] |
| Post subject: | cr250m 1973 will 1976 motor parts fit |
hi i have read that 76 gear box fits in the 1973 cases.what other parts will interchange.will crank and ignition swap.i know the barrel is different cheers jimg
|
|
| Author: | Stephen [ Mon Aug 06, 2007 7:00 pm ] |
| Post subject: | Re: cr250m 1973 will 1976 motor parts fit |
Some will, some won't. For specific parts, I go to a site like Discount Honda Parts that have the parts numbers listed and crossed to diagrams. If the part numbers are the same, they should fit. I use this quite a bit when looking at various parts on e-Bay. Just for info, Discount Honda Parts doesn't have a lot available for vintage bikes. Just because they will let you order, doesn't mean that they have any of it in stock. |
|
| Author: | Elsinorestuff [ Tue Aug 07, 2007 10:37 pm ] |
| Post subject: | Re: cr250m 1973 will 1976 motor parts fit |
The complete transmission will fit in the 73 cases. The clutch and shift shaft are the same as well as the clutch cover. The crank will not work since the rod is longer in the 76 model. The ignition will work in the 73 but you can only swap the 76 into the 73. It may not work the other way. |
|
| Author: | jimg1au [ Wed Aug 08, 2007 7:29 am ] |
| Post subject: | Re: cr250m 1973 will 1976 motor parts fit |
could i use the crank if i put a spacer under the barrel i have seen these forsale on the web longer rod c/w spacer.to suit cr250 1973 cheers jimg |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|