Vintage Dirt Bike Q & A
https://vintagedirtbikeforums.alp-sys.com/

74 CR125 with 34 mm Keihin
https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1534
Page 1 of 1

Author:  flphil [ Fri Aug 10, 2007 8:49 pm ]
Post subject:  74 CR125 with 34 mm Keihin

I have a couple of 34 mm Keihin carbs in good shape and thinking about putting one on my Elsinore. I currently am running a 30 mm Mikuni. I have searched the board and found references to people using a 34 mm Mikuni but not the Keihin.

Questions...
Has anyone tried this and if so, what were the results?
I have not tried to match it up but I would think that the Keihin would not fit the intake manifold. Are people using a different intake for their 34s? Same question on the airbox boot. I think I am running one from a 76 or 77 elsinore right now so it might fit the Keihin.
Lastly, any idea where to start on jetting?

Any info is appreciated.

Thanks
Phil

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/