| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| suitin up CR125m 74 https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1645 |
Page 1 of 1 |
| Author: | 74elsinore [ Tue Nov 20, 2007 7:49 pm ] |
| Post subject: | suitin up CR125m 74 |
hey i was trying to figure out some ways to imporve the performance of my cr, i was thinking about 32 milki card or should i do 34mm. Also which is the best pipe to get, i see alot of people have pro form. Also a superflow filter. Does anyone change the sprocet size or keep to stock after all that. Is there anything else i can do? |
|
| Author: | frohrs [ Wed Nov 21, 2007 9:32 am ] |
| Post subject: | Re: suitin up CR125m 74 |
I think a 32mm Mikuni with a pipe and some porting is a good choice. I would recommend a rod kit too! Pro-Form pipes are nice & quiet at an idle. However I prefer the FMF pipe or the DG. I run the 1975 filter. Gearing is a mater of choice, tracks, and your weight. I'm 180 and run a 14 counter & 52 rear. That works for me! You might look into getting a good aftermarket arm & shocks. Good Luck frohrs1 |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|