| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 1973 CR250M Jetting info https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1712 |
Page 1 of 1 |
| Author: | goneriding [ Thu Jan 10, 2008 11:57 pm ] |
| Post subject: | 1973 CR250M Jetting info |
I am rebuilding a basket case 1973 CR250M honda elsinore and have discovered the nearly complete carb is missing the needle jet, does any have information or knowledge on what size the or part number the stock bike had? |
|
| Author: | dogger315 [ Sat Jan 12, 2008 3:35 pm ] |
| Post subject: | Re: 1973 CR250M Jetting info |
I looked at the needle on my Elsinore and the # 043 was inscribed. Also the Honda part number is (if it's still available) 16013-357-014. Another source is Keyster which makes replacement parts and rebuild kits for Keihin carbs. Good luck. dogger |
|
| Author: | dogger315 [ Sat Jan 12, 2008 5:10 pm ] |
| Post subject: | Re: 1973 CR250M Jetting info |
Correction, the needle has D43 inscribed not 043. dogger |
|
| Author: | goneriding [ Sun Jan 13, 2008 9:58 pm ] |
| Post subject: | Re: 1973 CR250M Jetting info |
dogger315, thanks for the info, I did find & buy a keyster kit on ebay today and it comes with the D43 needle, success! I had been searching for a couple days and had come up empty, much appreciated. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|