| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 1979 CR125 Intake Boot w/ 34mm Carb? https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=180 |
Page 1 of 1 |
| Author: | J [ Thu Mar 25, 2004 2:17 pm ] |
| Post subject: | 1979 CR125 Intake Boot w/ 34mm Carb? |
How do you fit a 34mm Mikuni into the stock 79 CR125 intake boot. Is there a larger aftermarket intake available? J |
|
| Author: | Rhawes [ Thu Apr 01, 2004 9:30 pm ] |
| Post subject: | '79 CR125R intake manifold with a 34mm carb? |
Some of the '79 CR125 intakes will streach to fit a 34mm carb, if not, you could locate an intake for an '80 CR125R or wait a few months for of the reproductions which are currently being made. Take care, Robert D. Hawes Jr. Mesa, AZ. |
|
| Author: | J [ Thu Apr 01, 2004 10:17 pm ] |
| Post subject: | |
Robert, Are they making reproductions for the 1979 that fit the 34mm or reproductions for the 1980 stock size? J |
|
| Author: | Rhawes [ Thu Apr 01, 2004 11:33 pm ] |
| Post subject: | '79 CR125 intake... |
J Yes on both accounts, the stock '80 CR125 intake was for a 34mm carb, which is what they will be made for. They will fit the stock '79 32mm or a 34mm '80. The best of both worlds...they will also fit the '76-'78 ME125's as well. Robert |
|
| Author: | J [ Fri Apr 02, 2004 9:58 am ] |
| Post subject: | |
Robert, Great! Will you be marketing these or will one of the internet vendors be selling them? Thanks for the info. J |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|