| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Wide Footpegs https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=1889 |
Page 1 of 1 |
| Author: | peterq [ Thu Jun 05, 2008 7:53 pm ] |
| Post subject: | Wide Footpegs |
Looking for a set of wide foot pegs. |
|
| Author: | b-joe [ Sat Jun 07, 2008 6:18 am ] |
| Post subject: | Re: Wide Footpegs |
for what a bike????? |
|
| Author: | peterq [ Sat Jun 07, 2008 12:09 pm ] |
| Post subject: | Re: Wide Footpegs |
78/79 Honda CR250 |
|
| Author: | redrocket190 [ Sat Jun 07, 2008 6:04 pm ] |
| Post subject: | Re: Wide Footpegs |
IMS. They need some grinding. John Astleford (http://www.jastco.com) did mine. |
|
| Author: | spuncrazy [ Sat Jun 07, 2008 8:59 pm ] |
| Post subject: | Re: Wide Footpegs |
AMS racing sells a pair, not cheap. |
|
| Author: | peterq [ Sat Jun 07, 2008 10:59 pm ] |
| Post subject: | Re: Wide Footpegs |
redrocket190 What year works best with the 78/79 from IMS. |
|
| Author: | spuncrazy [ Sun Jun 08, 2008 8:31 am ] |
| Post subject: | Re: Wide Footpegs |
Here are the ones from AMS. http://www.amsracing.com/foot_pegs.html |
|
| Author: | redrocket190 [ Sun Jun 08, 2008 10:08 am ] |
| Post subject: | Re: Wide Footpegs |
peterq wrote: redrocket190, What year works best with the 78/79 from IMS. Don't know got them direct. I looked at AMS' and they look very similar and are cheaper.... |
|
| Author: | hrc21 [ Sun Jun 08, 2008 11:22 am ] |
| Post subject: | Re: Wide Footpegs |
Have a aftermarket set on my 79 cr250,from a 1999 honda cr250.Much wider and bolt straight on with a little work on a bench grinder. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|