| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| HONDA CR250M 1973 KICK STARTER INTER CHANGE https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2121 |
Page 1 of 1 |
| Author: | jimg1au [ Fri Jan 02, 2009 4:26 am ] |
| Post subject: | HONDA CR250M 1973 KICK STARTER INTER CHANGE |
HI what other kick starters will fit the cr250m as my CF pipe is too close to use cant get a good kick when starting the engine.need something that turns out a bit more to give me clearance thanks jim |
|
| Author: | rayivers [ Fri Jan 02, 2009 8:08 pm ] |
| Post subject: | Re: HONDA CR250M 1973 KICK STARTER INTER CHANGE |
The MR250 kickstarter should fit, as the shaft is the same as the early CR250M's. I have a picture of both bikes side by side and it looks to me like the MR250 kick arm may be an inch or so shorter than the CR250M arm, but I don't know if that will help you or make things worse. I think if it were me, I'd try bending my existing arm out a bit more. I'd obviously do it off the bike, and with the arm bend point heated cherry red. There's a CR250M kicker on eBay right now, and every now and then someone parts out an MR250, although they're fairly rare. Ray |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|