| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Rich Gagnon https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2385 |
Page 1 of 1 |
| Author: | woosh [ Thu May 21, 2009 8:21 am ] |
| Post subject: | Rich Gagnon |
Has anyone had a port job done by this guy and if so how did you like the results. From what I have read and he has said he knows his stuff. I am gonna get some port work done on my 73 cr250m cylinder and he says he wants the casses as well as he has some fairly new stuff he wants to see if he can do. It sounds interesting and I will probably do it. Just wondering if anyone else has experience with him. |
|
| Author: | Nathan [ Fri May 22, 2009 7:10 am ] |
| Post subject: | Re: Rich Gagnon |
It makes sense that he wants the cases so he can match the ports between the cylinder and cases for smooth flow. |
|
| Author: | woosh [ Fri May 22, 2009 9:02 am ] |
| Post subject: | Re: Rich Gagnon |
I talked to him he seems like a nice guy was doin yard work when I called and he quit to talk to me. He said he has a new process where he actually adds another transfer port or somthing like that. I think he said he only did it to a hodaka 125 and he wants my cases to see if its possible on my mt250. I am gonna have him go all out on this thing he said he can fabricate a reed valve setup for it and then do a very wild port job. He said he can probably give me power from the bottom to the top so I am excited. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|