Vintage Dirt Bike Q & A
https://vintagedirtbikeforums.alp-sys.com/

Fork wipers
https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2546
Page 1 of 1

Author:  ohm [ Wed Oct 14, 2009 8:38 pm ]
Post subject:  Fork wipers

I am going to be replacing the fork seals on my 1980 CR250, I was able to get new seals but from the dealer I was not able to acquire a set of wipers. Does anyone one know where they can be had and what size they are supposed to be and what size boots should I get.

Thanks
Ohm

Author:  redrocket190 [ Wed Oct 14, 2009 9:17 pm ]
Post subject:  Re: Fork wipers

If you mean the dust seal (51425-430-000) that goes above the seal proper, I'm pretty sure you are SOL on the original part front. Try http://www.cmsnl.com. You can get Daystar fork boots that will fit the 37mm stock forks. Ask at the local dealer.

Author:  ohm [ Thu Oct 15, 2009 7:13 am ]
Post subject:  Re: Fork wipers

Yeah those were the one I was talking about, CMS does list them. I think I well just get the daystar boots and that should hopefully keep things clean.

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/