Vintage Dirt Bike Q & A
https://vintagedirtbikeforums.alp-sys.com/

what weight of oil?
https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=258
Page 1 of 1

Author:  Guest [ Thu May 27, 2004 7:08 pm ]
Post subject:  what weight of oil?

i have a 78 cr250 and i was wondering what is the proper weight of oil to use when doing an oil change? just a 5w30 or?

thanks!

Author:  Guest [ Thu May 27, 2004 7:11 pm ]
Post subject: 

sorry also what is the correct amount to put back in..... thanks

Author:  redrocket190 [ Fri May 28, 2004 1:55 pm ]
Post subject: 

If you just drain the transmission in place, put 500 cc back in. If you are doing a re-build put 750 cc in. There is a cross-head/hex oil level screw on the right-hand side of the motor , but I do not use this method to check there is enough oil in the transmission. I use motorcycle-specific Bel-Ray SAE80 weight oil rather than automotive products to avoid any friction modifiers that will hurt performance of the clutch.

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/