| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| MR 175 intake manifold https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2698 |
Page 1 of 1 |
| Author: | Whitey® [ Thu May 27, 2010 9:06 pm ] |
| Post subject: | MR 175 intake manifold |
I'm currently in the process of restoring a 76 mr175 , so far everything on the bike is pretty salvageable but I'm missing the carb and and intake manifold. I'm most worried about the intake manifold though, I can't find one for sale anywhere. Is there a more specific name for the part I'm searching for? My whole restoration project is kinda hanging on me finding an intake manifold. Any help would be highly appreciated. |
|
| Author: | rayivers [ Fri May 28, 2010 8:09 pm ] |
| Post subject: | Re: MR 175 intake manifold |
Do you need a real nice one, or just one that works? I assume you also need the gasket, bolts, clamp. etc.? This guy has a new one in stock (it isn't cheap): http://www.hondarestoration.com/nosResu ... MR175-1977 ... and this guy may be willing to pull his off the motor and sell it separately; I've done this several times with CR125 manifolds: http://cgi.ebay.com/ebaymotors/Honda-CO ... 3efff983a4 I'm surprised there aren't any on eBay. Over the past couple of years I must have seen 20 or more for sale there, either separately or with a carb or cylinder attached. I may have one in my parts box, but I believe it's been repaired. Ray |
|
| Author: | Whitey® [ Fri May 28, 2010 10:04 pm ] |
| Post subject: | Re: MR 175 intake manifold |
I just need one that works for the moment, luckily I got the bolts and making a gasket isn't hard. I was thinking of having a guy I know at a machine shop make me an adapter that bolts on to the engine and then I could attach a heater hose from it to the carb kinda like the manifold that the pipe goes on to. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|