| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Stock spoke size? https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2855 |
Page 1 of 1 |
| Author: | 56mulberry [ Thu Nov 04, 2010 1:28 pm ] |
| Post subject: | Stock spoke size? |
Looking for correct spoke size for rear rim on 1980-81 CR80? Looks like I need 36 5" spokes total, with 90 degree bend...? ANybody know for certain? Was thinking about putting black rims on it as I have to relace rear rim anyways due to several broken spokes and some rust on rim...? Either way nee correct size to replace them... |
|
| Author: | rayivers [ Thu Nov 04, 2010 1:58 pm ] |
| Post subject: | Re: Stock spoke size? |
Honda P/N 97284-42086-F0 (10X123mm) and Honda P/N 97824-42085-F0 (10X122.5mm) Ray |
|
| Author: | b-joe [ Thu Nov 04, 2010 5:02 pm ] |
| Post subject: | Re: Stock spoke size? |
when i need new spokes i go to our local wheelbuilder an give him some old spokes, so he has an exsample to make new ones. not only the total lengh is needed, also the exact angle, whitch is not exact 90°, the length from bow to head, and the spokediameter. the spokenipple must fit to the rimhole. so you will get a good durable wheel. |
|
| Author: | osu_cowboy [ Sun Nov 07, 2010 1:19 pm ] |
| Post subject: | Re: Stock spoke size? |
Have you tried Buchanan Spoke? I know they have them for the 250R. They also do custom spokes. Might be worth a shot. |
|
| Author: | 56mulberry [ Mon Nov 08, 2010 8:40 am ] |
| Post subject: | Re: Stock spoke size? |
sent Buchanan email last night hope to hear from them soon toady sometime...D |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|