| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Looking for 79 CR125 OEM New or Used Fork Bolts https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2972 |
Page 1 of 1 |
| Author: | czechman [ Sun Mar 20, 2011 4:49 pm ] |
| Post subject: | Looking for 79 CR125 OEM New or Used Fork Bolts |
Hello again all. After a lengthy couple of year hiatis with my CR (life unfortunately gets in the way at times) I am back to finishing off my CR125 rebuild project. I am looking for two 79 CR125 OEM new or lighly used fork bolts. It is apparent the previous owner did not have Metric tools in the 80's and decided that a pipe wrench would work just fine and molested the crap out of the bolts. I can pay by paypal or ebay or whatever you may want to use to complete a transaction if you have these bolts. (My ebay id is czech20). Shoot me a PM or respond to this thread if you can help me out. Thanks in advance. Cheers |
|
| Author: | b-joe [ Mon Mar 21, 2011 12:14 pm ] |
| Post subject: | Re: Looking for 79 CR125 OEM New or Used Fork Bolts |
ask your local hondadealer for: 95701-08065-08 BOLT, FLANGE (8X65) 94050-08080 NUT, FLANGE (8MM) 95701-08040-08 BOLT, FLANGE (8X40) |
|
| Author: | czechman [ Mon Mar 21, 2011 12:40 pm ] |
| Post subject: | Re: Looking for 79 CR125 OEM New or Used Fork Bolts |
I have a different part number directly from a microfische. Are these numberes for the same part but for a different year/model? What are thses part numbers for or off of? Thanks for the help. |
|
| Author: | czechman [ Tue Mar 22, 2011 7:24 am ] |
| Post subject: | Re: Looking for 79 CR125 OEM New or Used Fork Bolts |
I found a couple bolts. Thanks for the help. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|