| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 82 cr250r shock recharge https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=2978 |
Page 1 of 1 |
| Author: | davep [ Sun Apr 03, 2011 4:56 pm ] |
| Post subject: | 82 cr250r shock recharge |
i have a 82 cr250 the rear shock is too soft how do i check the nitrogencharge or where do i get it recharged or do i just needto adjust the spring when i sit on the seat it goes down pritty easy help |
|
| Author: | b-joe [ Mon Apr 04, 2011 9:49 am ] |
| Post subject: | Re: 82 cr250r shock recharge |
out of the workshopmanual: remove the shock absorber. remove spring of the shock. place the damper rod on a scale and measure the force required to compress the damper until 10mm (0.4in). compression force: 28-38kg (62-84lbs) if the force required is less than 28kg (62lbs), the gas pressure is too low. recharge with nitrogen. any suspension shop will help you by rechargeing. pressure must be 284 +/- 14 lbs. after installing the spring, adjust the spring length to 245mm (9.6in). don´t go less than 240mm (9.4in) or more than 259mm (10.1in). is it still too soft at 240mm you´ll need a harder spring. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|