Yep I thought you night say that, hmm... Thanks for the help tho.
I have a few flywheels I may try skimming one and see what its like.
| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| does any other smaller / lighter flywheel fit the MT250 https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=3003 |
Page 1 of 1 |
| Author: | JonW [ Tue May 03, 2011 1:42 am ] |
| Post subject: | does any other smaller / lighter flywheel fit the MT250 |
I noticed today how the revs die so very slowly on the MT250 and wondered if anyone had ever found a replacement that crisps up the engine at all? I could skim it but traditionally most flywheels are weighted at the factory and just skimming material off would mean its out of balance of course. |
|
| Author: | woosh [ Tue May 03, 2011 11:04 am ] |
| Post subject: | Re: does any other smaller / lighter flywheel fit the MT250 |
As far as I know the cr250m 73 to 74 ignition system will fit and the mag is way smaller and lighter. The downside is your gonna lose your lights as the cr was an ignition only system. |
|
| Author: | JonW [ Tue May 03, 2011 5:37 pm ] |
| Post subject: | Re: does any other smaller / lighter flywheel fit the MT250 |
Yep I thought you night say that, hmm... Thanks for the help tho. I have a few flywheels I may try skimming one and see what its like.
|
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|