| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| o-ring size https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=3103 |
Page 1 of 1 |
| Author: | crcraig [ Fri Sep 30, 2011 5:58 pm ] |
| Post subject: | o-ring size |
anybody know the diameter of the o-rings that hold on the front # plate 79 cr250 I just got original plate but need o-rings I had an after market plate on front but do not like the mounting of it |
|
| Author: | redrocket190 [ Wed Oct 05, 2011 9:47 am ] |
| Post subject: | Re: o-ring size |
Find an appliance repair shop and check out their supply of sewing machine drive belts and/or vacuum cleaner belts. I personally found the latter to thick / strong and they deformed the mounting tabs. The former work OK but have a shorter lifespan. BTW, you can use the same source for the rubber band that pinches the side panels to the air box. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|