| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| MT250 - Other fenders that can fit https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=3641 |
Page 1 of 1 |
| Author: | The Actionman [ Thu Feb 16, 2012 3:44 pm ] |
| Post subject: | MT250 - Other fenders that can fit |
Researching some new plastic fenders as opposed to painting the orginal ones. Mine are a little rough and have some cracking coming through the old molded material. I've seen a couple out there that look "close" and several that might work with some mods. Can anybody supply me with a good cross reference of other Honda or other models that have front fenders that will work without much modification on the MT250? Thanks! |
|
| Author: | rayivers [ Thu Feb 16, 2012 7:58 pm ] |
| Post subject: | Re: MT250 - Other fenders that can fit |
The early CR125M / MT125 / MR175 fenders will bolt right onto your MT250 and are the same color as the original, and later models of the above - along with the early XL125 - should also fit but will be various colors. I imagine quite a few fenders - Honda and otherwise - can be made to work without too much modification. Ray |
|
| Author: | The Actionman [ Fri Feb 17, 2012 1:17 pm ] |
| Post subject: | Re: MT250 - Other fenders that can fit |
Thanks Ray! So all the CR's and MR's have the same fender bolt patterns as the MT's? I'm still somewhat new to these older girls and trying to research this stuff is daunting without a good forum resource like this one! |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|