If you're rebuilding an MR motor and are splitting the cases, I'd go ahead and replace both crank seals. If not, I'd replace the LH one behind the ignition and then see how it runs. It's kind of hard to make an absolute determination of the condition of the RH MR175 crank seal unless you have a 2-stroke leakdown tester, or the bike's obviously burning gearbox oil.
My own experience has been that the RH seals last a long time and the LH ones don't, not sure if that's typical or not.
Ray
_________________ '74 CR125M (175cc), '75 MR175, '82 RM250Z, '08 YZ250F, '14 Zero FX electric, '14 Zero MX electric, '18 Alta MXR electric
|