| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| cr 125 1980 gear lever https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=379 |
Page 1 of 1 |
| Author: | fred [ Sun Sep 26, 2004 2:46 pm ] |
| Post subject: | cr 125 1980 gear lever |
Hi, can any one advise me on an after market gear lever for a 1980 cr 125 preferably alluminium but steel ok but must have a folding tip thanks for the space |
|
| Author: | J [ Sun Sep 26, 2004 4:34 pm ] |
| Post subject: | |
You may want to try Moose Racing. This is what they look like: http://www.mooseracing.com/gearProductS ... VERS&rank= I have one on my 79 CR125. I'm not sure if you can buy them direct or on other motorsports sites. Good luck! J |
|
| Author: | frohrs [ Mon Sep 27, 2004 11:07 pm ] |
| Post subject: | Folding shift levers. Steel |
Try http://WWW.DENNISKIRK.COM or 1-800-328-9280. Steel folding shift levers. CR125R 79-82 Part# 57-477 $25.95. Made by Moose racing! |
|
| Author: | Rhawes [ Thu Oct 07, 2004 10:32 am ] |
| Post subject: | '80 CR125R gearshift pedal |
Fred, If you like OEM Honda parts, try the pedal from an '81 CR125RB (PN# 24700-KA3-000); it's made if steal like the stock '80 125 pedal, however it is a folding unit and offers the same fit. Take care, Robert |
|
| Author: | Guest [ Sun Oct 10, 2004 2:20 pm ] |
| Post subject: | Re: '80 CR125R gearshift pedal |
Rhawes wrote: Fred,
If you like OEM Honda parts, try the pedal from an '81 CR125RB (PN# 24700-KA3-000); it's made if steal like the stock '80 125 pedal, however it is a folding unit and offers the same fit. Take care, Robert Thanks all !!!!!!!!!!!!!!! fred |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|