Vintage Dirt Bike Q & A
https://vintagedirtbikeforums.alp-sys.com/

How do I know if I have the stock carb?
https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=3790
Page 1 of 1

Author:  mxgirl75 [ Sat Sep 08, 2012 4:27 pm ]
Post subject:  How do I know if I have the stock carb?

I have a 79 CR250, I know for a fact when I bought it, it had 1980 forks on it. So how do I know what carb is on the bike? It is a Kehin, but I am not sure what size. I need to get a couple parts for it and it would help greatly if I knew what it is! Anyone know how to tell?

Thanks!!

Author:  redrocket190 [ Sun Sep 09, 2012 9:02 am ]
Post subject:  Re: How do I know if I have the stock carb?

See if it is stamped anywhere with "PE01A". Also measure the downstream engine-side of the carb and see if it is 36mm. Post a photo. Send me a PM to get a manual if you want one.

Author:  mxgirl75 [ Mon Sep 10, 2012 12:53 pm ]
Post subject:  Re: How do I know if I have the stock carb?

It is stamped PE 01A and possibly 001. Is the stock carb on a 79 a 36mm?

Author:  redrocket190 [ Mon Sep 10, 2012 9:03 pm ]
Post subject:  Re: How do I know if I have the stock carb?

Yes.

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/