| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Question on fork seals off ebay! https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=3824 |
Page 1 of 1 |
| Author: | oleguy [ Mon Oct 08, 2012 6:43 pm ] |
| Post subject: | Question on fork seals off ebay! |
I removed the old fork seals from my 74 mt250, the old seals were really two seals banded together to make one seal. The replacement seals I bought off ebay were just one seal and theres about a 1/16" gap between the seal and cir-clip, not enough room for another seal. wondering if this is the wrong seal or just a universial type seal, it seated good and fits the tube well. Any input would be greatly appreciated! |
|
| Author: | mxgirl75 [ Mon Oct 08, 2012 7:35 pm ] |
| Post subject: | Re: Question on fork seals off ebay! |
I just looked at the Clymer manual and it has your forks in it. There is only the seal and and then a cir clip, the dust seal is the rubber wipers that fit over the top of the bottom fork body. Hope that helps.. Kristi |
|
| Author: | oleguy [ Mon Oct 08, 2012 9:07 pm ] |
| Post subject: | Re: Question on fork seals off ebay! |
Thank you Kristi! |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|