| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 76 Honda Elsinore 250 kick starter problems https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=40 |
Page 1 of 1 |
| Author: | Bent Pegs [ Sun Jan 25, 2004 9:58 pm ] |
| Post subject: | 76 Honda Elsinore 250 kick starter problems |
I have a 76 CR250ME the kick starter wasn't springing back very well and would stick. I opened up the side and can't tell what the problem is and really don't know what to look for. Does someone have an exploded view of this I can see or email me or suggestions. Thank you, Bent |
|
| Author: | Rick [ Sun Jan 25, 2004 9:59 pm ] |
| Post subject: | Re: 76 Honda Elsinore 250 kick starter problems |
Simple fix. Pull the side cover off again and replace the two alignment dowels. This is a very common problem with the early CR250's. Honda part number is 9301-10160. These are bent due to backfiring while kickstarting and the slight misalignment is causing the shaft to bind some. Rick |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|