Vintage Dirt Bike Q & A

The case for the headlight on the MT250 is held on with bolts running through a nut on the inside of the case on each side. Each of those nuts has a wire with bullet connector soldered to it. What are those wires for? Doesn't seem like it makes sense to have them as grounds since there is a chassis ground wire that comes into the light housing as well.

it´s the ground for the turn signal lights mounted to the headlight.

_________________
80 CR250Ra
80 CR250Ra
78 CR250R
80 CR80
82 Bultaco Sherpa 340
78 Bultaco Pursang 250 MK12
76 Bultaco Frontera 370 MK10
76 Bultaco Alpina 250
73 Bultaco Lobito 125 MK6
76 Suzuki RM125A
90 Kawasaki KX250

That makes sense. Thanks.