| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Intake manifold CR125 https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4150 |
Page 1 of 1 |
| Author: | Van/TX [ Thu Sep 05, 2013 10:04 am ] |
| Post subject: | Intake manifold CR125 |
Got the new Mikuni 34mm round slide carb to replace my Keihin. The Mikuni came with a 240 main jet. I'm gonna start with a 330 first to see what happens. In the meantime the rubber on the original intake is about shot. Has a split in top front. Hoping the clamp will keep it air tight. Anyone have a source for an intake. 1980 CR125. Thanks |
|
| Author: | rayivers [ Sat Sep 07, 2013 1:48 pm ] |
| Post subject: | Re: Intake manifold CR125 |
I repaired a small split in the bottom of mr MR175 intake manifold with JB Weld last year, it's still going strong. If you can't find a good used one on eBay, here's a big-bucks repro: http://hotfootmoto.net/store/product.ph ... 256&page=1 Ray |
|
| Author: | Van/TX [ Sun Sep 08, 2013 2:06 pm ] |
| Post subject: | Re: Intake manifold CR125 |
Thanks. I broke down and ordered this one. Pricey but I'll be putting that carb on and taking it off many times I'm sure before I get the jetting right. We'll see how it work. |
|
| Author: | Van/TX [ Sun Sep 08, 2013 2:08 pm ] |
| Post subject: | Re: Intake manifold CR125 |
Oops forgot link  http://www.ebay.com/itm/1980-HONDA-CR125-BILLET-CARB-INTAKE-MANIFOLD-AHRMA-POST-VINTAGE-JOHNNY-OMARA/221279067442?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D1149179719811266068%26pid%3D100011%26prg%3D1005%26rk%3D1%26rkt%3D5%26sd%3D271080189757%26 |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|