| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Shock length for '76 CR/MR 250? https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4409 |
Page 1 of 1 |
| Author: | t.read [ Mon Jan 05, 2015 11:07 am ] |
| Post subject: | Shock length for '76 CR/MR 250? |
Anyone know what they're supposed to be? I'm having a hard time finding that dimension through the internet searches. I'm about to order some Race Tech shocks for my MR Cross Country race bike and I don't want to end up with one that is over 1" longer. They say 1/2-1" longer is ok though. Right now, I have the 13 series Progressives which are 400mm eye to eye measured off the bike. I like the length of these as they seem to give it a bit more travel and I like the way it turns. I never had stock shocks when I got this bike so I have no frame of reference. The Progressives are so stiff, it doesn't sag at all on it's own. I put the softest springs they make for them and it'll sag very little with me on it. I did the ISDT Reunion Ride out in Oklahoma in October and the rocks out there beat me to death! Race Tech gives a good deal to AHRMA racers and having custom shocks is always helpful. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|