Vintage Dirt Bike Q & A
https://vintagedirtbikeforums.alp-sys.com/

CR vs. MT/MR Tank
https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4550		 Page 1 of 1
Author:  bill humphrey [ Tue Sep 22, 2015 1:49 pm ]
Post subject:  CR vs. MT/MR Tank
8) Hi All. I picked up an aluminium Elsinore tank for a Champion frame project as well as an Elsinore seat with the aluminium base and - it turned out - the frame was configured for flatrack, not motocross. The tank shows red paint with a spec of black where the border would be. Now my question. Is this tank a MT/MR model? I'm listing both on Ebay and I don't want to misrepresent the tank in the description. Thanks for your help. bill
Author:  texasmark [ Tue Sep 22, 2015 8:35 pm ]
Post subject:  Re: CR vs. MT/MR Tank
Hello, every MT250 fuel tank I have ever seen is steel, not sure about the 76 MR250.

Mark
Author:  Rustynutz [ Thu Sep 24, 2015 5:23 pm ]
Post subject:  Re: CR vs. MT/MR Tank
Red stripe on top with two black pin stripes aluminum tank = 1975 Honda CR250 and it will fit 75-76 cr250
Author:  bill humphrey [ Sun Sep 27, 2015 11:46 am ]
Post subject:  Re: CR vs. MT/MR Tank
Thank you for your imput. Really appreciate it. bill
Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/