You are a dreamer. Sorry.
For those who have never worked on a stock MT250 before this is a pain.
45 year old rubber boot and intake rubber that have hardened and may tear if you look at it wrong...
Cheers, Rick
| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| slow jet dirty? 1975 MT250 won't idle. https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4630 |
Page 1 of 1 |
| Author: | bbflamingo [ Wed May 04, 2016 3:34 pm ] |
| Post subject: | slow jet dirty? 1975 MT250 won't idle. |
MT250 tank cleaned with evapo-rust 4 times, great stuff. gas is now clean and bike runs up through to red line, but it won't idle. I'm thinking blow or poke out slow jet. So my questions are, can I reach this jet without removing the carb. again? Can I get to it through removal of the big brass nut at float bowl or am I REALLY dreaming? THANK YOU GUYS! BB. |
|
| Author: | Rick [ Wed May 04, 2016 3:49 pm ] |
| Post subject: | Re: slow jet dirty? 1975 MT250 won't idle. |
You are a dreamer. Sorry. For those who have never worked on a stock MT250 before this is a pain. 45 year old rubber boot and intake rubber that have hardened and may tear if you look at it wrong... Cheers, Rick |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|