| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Honda mt250 carb https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4713 |
Page 1 of 1 |
| Author: | merc47 [ Tue Dec 06, 2016 12:48 pm ] |
| Post subject: | Honda mt250 carb |
I have a 74 mt250 I cant find any info what size of 0 ring is used on the float bowl drain plug on the left side, And is there any other carb that is a replacement and will bolt up. |
|
| Author: | rayivers [ Wed Dec 07, 2016 10:06 am ] |
| Post subject: | Re: Honda mt250 carb |
If you have the stock carb (with the large drain plug on the bottom of the float bowl), a Honda 91302-KE8-003 O-ring works well. Early CR125M and all MR175 carbs are nearly identical to the OEM MT250 carb and fit perfectly. A new Keihin PE28 carb should work, but will need an adaptor for the airbox end. Ray |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|