| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| Cr stator and flywheel in Mt? https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=4719 |
Page 1 of 1 |
| Author: | BriceB [ Thu Dec 15, 2016 9:33 am ] |
| Post subject: | Cr stator and flywheel in Mt? |
Hi I have a 1974 mt125 engine that I have put on a 1974 cr125 frame. The cr frame still has its oringinal magneto and the electrical box thing. The mt stator and flywheel don't seem to be working so I was wondering if I could put a cr flywheel and stator? Thank you |
|
| Author: | rayivers [ Thu Dec 15, 2016 2:57 pm ] |
| Post subject: | Re: Cr stator and flywheel in Mt? |
As long as the MT and CR crank keyways are in exactly the same position, it should work. The '74 CR rotor is designed to be held on with a bolt and not a nut like the MT flywheel, but the nut should work fine with a washer underneath it. Ray |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|