| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 76' MT 250 Parts needed https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=535 |
Page 1 of 1 |
| Author: | 74elsieguy [ Tue Feb 01, 2005 6:17 pm ] |
| Post subject: | '74 cr250 |
Are there any tricks to yeilding more power out of the stock '74 250?aftermarket parts? |
|
| Author: | Labyrinth [ Wed Feb 02, 2005 12:44 am ] |
| Post subject: | 76' MT 250 Parts needed |
I've been looking for sometime and i can't seem to find (at a decent cost) parts for my MT 250. I have gone the e-bay route, but only can find stuff like seat covers and brake levers. I mostly need electrical parts, the whole system actually, including the switches on the handlebars and the rear lights rack. also a new chain, rear wheel, seat cushin and air filter. what other year/model bikes can i get these from. it seems i can find every other elsinore year or model but this one online for parts. and the local dealers all say it's too obscure to get parts for. Keith labyrinth277@yahoo,com |
|
| Author: | ricortes [ Wed Feb 02, 2005 12:34 pm ] |
| Post subject: | |
Are you sure there are differences between 74-76? About the only thing I think changed is the trim on the exhaust. For most of the parts like chains, clutch, brakes, I would try http://www.denniskirk.com as they have good prices and service. I know of a MT parts bike in the Sacramento California area. If you are in that area I could see if the guy still has it or give you his email address. It's been about a year since I saw it, but it may still be there. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|