Vintage Dirt Bike Q & A

i need to find a sorse for air filter and gaskets, need asap. email me with info at mailto:snowmobiledave@hotmail.com

Check out http://www.cometic.com for your gaskets.

_________________
Michael Stiles
1979 Honda CR250R Elsinore | 2006 Husqvarna SM510R | 2007 Service Honda CR500R-AF

and check out http://www.unifilter.com for the filter

_________________
74 MT-250
06 Husky TE-450

i have a DEALER account with Cometic, they aint got it, i also have a dealer account with Marshall distributing, bell ind. , Automatic Distributing Hiperformance Enginering, and WSM Performance Parts, i tried Windrosea also. I REALLY need these parts, any help would be appreaciated. i talked to UNI, EMGO, K&N, to get the air filter and no luck, i have been searching ebay as well, nothing yet.

The Cometic top-end kit is part # 7465 and is in their 2004 catalog, but might have been discontinued.

_________________
Michael Stiles
1979 Honda CR250R Elsinore | 2006 Husqvarna SM510R | 2007 Service Honda CR500R-AF

It is your lucky day...

http://www.westernhillshonda.com
12191-373-000 Base cylinder gasket $7.95
12251-360-000 Head gasket $15.95
11191-373-000 Crankcase center gasket $17.95
11395-360-306 Clutch cover gasket $9.95

http://www.cmsnl.com
17214-381-000 Air Cleaner Euro 45.00
These people had all the above parts, but the Euro to USD exchange rate is about as nasty as gas prices. I'd call Western Hills and ask about alternative air cleaner solutions.

Approximately 15 minutes work, including the research time on http://www.powersportspro.com to get the correct Honda part # (see my other post on finding parts).

_________________
Michael Stiles
1979 Honda CR250R Elsinore | 2006 Husqvarna SM510R | 2007 Service Honda CR500R-AF

The Air filter is listed on the Unifilter Web page under vintage. That's where I got mine

MT 125
1974-76
NU-4013
26.95

_________________
74 MT-250
06 Husky TE-450

I have MT125 gasket sets with a copper replacement head gasket for $23 plus $2 for shipping if you are still looking mailto:elsinorestuff@qwest.net

Jake, thanks, i have a deaer account with them and they told me" sorry we dont have it", im very thankfull ya found it, the guy ran it using a sock to get by, he brought it back, said the clutch was sliping, well i didnt want to take the case off till i found a gasket kit....
Posted: Thu Sep 08, 2005 8:12 pm Post subject:

--------------------------------------------------------------------------------

I have MT125 gasket sets with a copper replacement head gasket for $23 plus $2 for shipping if you are still looking mailto:elsinorestuff@qwest.net WOW.... THANKS, now i can tear into it, i KNOW its gunna need a clutch kit, where can i get one of thoes, ill need the friction plates/springs/disks,AND... heres the BIG ONE... its got low compression, it DEFINETLY need a 1st or 2nd over pistion kit, THATS a hard one for me to find, iv been leaving parts searcher every where, iv made ALOT of phopne calls, so if yall can track down one id be way greatfull, i know people are restoring these, WHERE ARE THEY GETTING PARTS,? help...PLEASE,