| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| CR250M2 Tank warning decal placement https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=823 |
Page 1 of 1 |
| Author: | Glenna [ Wed Nov 16, 2005 9:34 pm ] |
| Post subject: | CR250M2 Tank warning decal placement |
I am about to order a decal set for my '76 CR250 from Reproduction Decals in Canada and I am wondering if anyone can assist with telling me which decals are correct for the M2 model fuel tank and if possible which is the correct placement on the tank. The decal kit carries 3 warning decals, my original microfiche only details 2 warning decals on the tank so I'm not sure which ones are correct. Maybe 1 was for the rear fender? I will be clear coating over the decals so once they are on, they are there for good. |
|
| Author: | Elsinore1 [ Wed Nov 16, 2005 11:44 pm ] |
| Post subject: | |
On the 73/74 parts bike I have, two go on the tank and one on the rear fender. There is a "Important Notice" sticker on the tank just under the cap. then just under it is a "sold as is warranty" sticker. The one i have on the rear fender is just a New Feature sticker. Boasting the new long travel suspension. Dont know if that will help? |
|
| Author: | Glenna [ Tue Dec 06, 2005 6:25 am ] |
| Post subject: | |
Thanks for that, my decals have arrived so its only a matter of finding some spare time now to apply them and clear coat the tank. I've done some web research but can't find even a photo of a '76 model tank from any angle that shows the decal placement, save for 1/2 a tank visible on an MT/MR model in my Hayes manual. No-one has any old magazine/test articles they can see the decal placement on? |
|
| Author: | Elsinore1 [ Tue Dec 06, 2005 9:53 pm ] |
| Post subject: | |
Check out this months featured bike. I think its a 79' but has them stickers in the same place as mine. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|