| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| most likely selling, any interest https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=21&t=982 |
Page 1 of 1 |
| Author: | willy8152 [ Thu Apr 06, 2006 1:20 pm ] |
| Post subject: | most likely selling, any interest |
I wanted to first offer up my elsie to those who may appreciate it most, before that dreaded auction site......... I will take some photos, but here is a basic description. 1975 CR250 Elsie serial number 2003035 or something like that. Point being, it is a CR 75' Bike is mostly dissasembled, I was going to do a full frame up restoration but honestly dont have the time, plus dealing with some health concerns that are more important, operations in the near future and such. Bike needs The original gas tank a new seat left side engine cover other than that it is complete, has great compression And I have the original pink slip, I am the second owner My brother in law (45 yrs old) was given the bike new by his dad and he has kept it all these years. very minor surface rust on a few spots on the frame, nothing that would need sanding, only some steel wool and elbow grease. Engine is in good shape, doesnt need a top end, stock bore, just needs a tune up kit from re-mx. (points, condensor, plug) minor leak from a seal, nothing to split cases over. I would rather sell the whole bike rather than part it out. How much? I dont know honestly, how about first honest offer, and I would rather not ship it. Once again it is completely torn down, rolling frame with bars, suspension and motor still on the frame, everything else is in a large crate. NO ORIGINAL GAS TANK INLCUDED, orignal seat needs new foam and cover. mailto:willy8152@yahoo.com is the best way to reach me. I am in orange county, Ca |
|
| Author: | willy8152 [ Thu Apr 06, 2006 4:39 pm ] |
| Post subject: | correction |
seat pan is fine, needs new foam and cover |
|
| Author: | ricortes [ Fri Apr 07, 2006 11:25 am ] |
| Post subject: | |
I've read something to the effect of "It is best to spend the money up front for a good bike then to save a buck and buy a bad one." The logic behind this is a $50 parts bike will cost $4,000 by the time you finish restoring it and a $1,500 'one owner, parked in a garage for the last 20 years' will end up costing you $4,000 by the time you finish restoring it. The difference is that $50 part bike also requires a year and a half looking for parts and a lot more elbow grease. That being said. Tank, seat, and side covers are 3 of the hardest things to find. I would guess around $400 would be a fair price for yours. The thing still has that much value in the rims, engine, etcetera, if you were to part it out. You could probably find someone that has a CR with blown engine, bent rims, but a gas tank and seat, that would want it to make one out of two. |
|
| Author: | willy8152 [ Mon Apr 10, 2006 10:05 am ] |
| Post subject: | |
seat foam is 65 bux at re-mx cover is cheap on ebay from dc plastics, as are the side covers seen the tank on ebay as well. I will think it over. anyone got a 86-89 TRX250 they wanna trade? |
|
| Author: | Nathan [ Tue Apr 11, 2006 10:39 am ] |
| Post subject: | |
Just a reminder. This is a KnowledgeBase for technical Q&A, not a classified ad site. Please use the http://www.elsinore-swap-meet.com page for all Elsinore related classified ads in the future. Thanks. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|