| Vintage Dirt Bike Q & A https://vintagedirtbikeforums.alp-sys.com/ |
|
| 74' GT-80 Want to take off lights/horn/etc.-Question https://vintagedirtbikeforums.alp-sys.com/viewtopic.php?f=28&t=1052 |
Page 1 of 1 |
| Author: | robbdoss [ Wed May 24, 2006 9:44 am ] |
| Post subject: | 74' GT-80 Want to take off lights/horn/etc.-Question |
Got a '74 GT-80. I want to take off all the lights/horn and associated switches. I'm concerned about screwing things up electrically if I just cut the cables. Bike has magneto. Anything I need to be aware of before I do this. Thanks for your help. |
|
| Author: | original dirt [ Thu May 25, 2006 8:48 am ] |
| Post subject: | |
First of all, never cut the cables on J-model bikes they have plug type disconnects to do the job cleanly. Secondly there is a black wire that runs from the mag to the coil , that is the only wire need to make the GT run. You'll have to connect a Kill button to the same wire. There is usually a 2-wire connector already in place to make that happen. Don't cut any wires !!! Originaldirt |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|