Vintage Dirt Bike Q & A • View topic - Is My MT250 Clutch Shot?

View unanswered posts | View active topics

Board index » Questions & Answers » Honda CR, MR & MT

All times are UTC - 7 hours [ DST ]

Is My MT250 Clutch Shot?

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

wrreed

Post subject: Is My MT250 Clutch Shot?

Posted: Thu Nov 03, 2005 10:25 pm

Joined: Sun Oct 30, 2005 10:39 pm
Posts: 6
Location: Tacoma, WA

Does anyone have wear limits for the MT250 clutch plates?

I tore apart my MT250 Clutch. Prev. Owner couldn't get it to work properly and rode without it. After draining oil/water from crankcase, I took the cluth plates out. Kind of crapped up and stuck together. So, I'll clean them, and install them and see if they'll work.

Any other tips/advice?

Thanks to all.

Top

ricortes

Post subject:

Posted: Fri Nov 04, 2005 10:40 am

Joined: Tue Mar 15, 2005 10:35 am
Posts: 254

Be real careful with the clutch basket. They are made cheap and will break if you give them the slightest excuse.

Friction plate wear limit is 2.4mm thick.

Top

wrreed

Post subject: Who put my MT clutch in backwards?

Posted: Sun Nov 20, 2005 10:47 pm

Joined: Sun Oct 30, 2005 10:39 pm
Posts: 6
Location: Tacoma, WA

Well, I took the clutch out, cleaned it the discs and padsand re installed it. But, the Previous Owner had the pressure plate on in the wrong position, so, it turns out the clutch is excellent and working great.

Top

Page 1 of 1

[ 3 posts ]

Board index » Questions & Answers » Honda CR, MR & MT

All times are UTC - 7 hours [ DST ]

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum